Hot Topics:
See All Topics

Make: Projects

Banana Oxidation Art

How to tattoo a banana.

  • By Jason Poel Smith
  • Category: Art & Design
  • Time Required: 10 min - 2 hrs.
  • Difficulty: Easy
Banana Oxidation Art

We’ve all seen bananas turn brown. In this project, I show you how to intentionally make spots on the peel prematurely brown so that you can make a picture.

Here is a video summarizing the project.

Steps

Step #1: Banana Oxidation Art

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • When you bruise or break the skin of a banana peel, it releases chemicals that oxidize and turn brown.
  • By using precision tools like a sewing needle, you can make small dots and scratches that are fine enough to draw a picture.

Step #2: Materials

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • To make this project you will need three things: A reference picture, a banana, and a sharp tool for marking on the banana.
  • First, select a reference picture. I am using The Cat in the Hat. It helps if the picture is proportioned so that it can at least somewhat fit on a banana. Long rectangular pictures will fit better than square pictures. With most pictures, you will probably need to crop the edges a little.
  • When selecting a banana keep in mind how the peel changes throughout its ripening process. The greener the banana is, the firmer its cell membranes are. When the cell is punctured, the chemicals do not bleed as much. This creates smaller, more well-defined dots. Riper bananas with weaker membranes will create larger dots with softer edges.
  • The marking tool that you select is determined by the kinds of lines that you want to make for your picture. Any sharp object can work, but as you might expect, each tool creates a slightly different mark. Smaller needles (like sewing needles) create small light dots. Larger needles (like thumbtacks) make larger darker dots.
  • Regardless of what sharp object you choose, you may wish to modify it slightly to make it easier to handle. For instance, something as small as a sewing needle can be difficult to work with. So I inserted it into the end of a 0.5 mm mechanical pencil. This made it a lot more convenient to use.

Step #3: Apply Your Stencil

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • If you are not a great freehand artist, I recommend starting with a stencil. Print out a copy of your picture scaled to the size of your banana. Then cut it out and line it up with your banana. You may need to trim it so that it will lie flat. Once you are happy with the positioning, tape down the edges.

Step #4: Create a Dot Outline

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • The first step in applying your image is to create a rough outline of all the major edges. On a given line, use your needle to pierce through the paper and into the banana peel. Try to make the puncture as shallow as possible. Repeat this all along the line. Try to keep the dots close together (no more than 1 mm apart).
  • Your hand will probably get tired after a while. This is the thing that everyone hates about pointillism. Try to complete whole lines or sections before taking a break. Otherwise a line may look uneven if certain parts are older and more developed than others.
  • After you have traced over all the major lines, you can remove the paper stencil. If all went well, there should be a faint dot outline of your image on the banana peel.

Step #5: Connect the Dots to Make a Solid Outline

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • Now it's time to play connect the dots. Go back over each line and fill in all the spaces by adding more dots until it looks like a solid line.
  • If at this point you and your hand are completely fed up with making dots, you can take a shortcut and connect the dots by just cutting the lines with either a knife or by dragging your needle across the surfaces so that it breaks the skin. This doesn't gives you quite as much control over the line shape but it is a lot faster and easier.

Step #6: Apply Shading

NextBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • After you have finished defining all the solid lines, it is time to add shading. When working with a banana peel the most useful shading techniques are stippling, hatching, and smooth shading.
  • Stippling: Creates shading by varying the density of dots. To create large dots, make shallow punctures in the skin as you did in the previous steps. To create smaller and lighter dots, hold the needle at a shallow angle and use your finger to repeatedly tap it against the surface. You may need to repeat this process several times.
  • Hatching: Creates shading by varying the density of parallel lines. Hatching can be difficult on a banana peel because the surface texture changes as you mark on it. This makes it harder to keep the lines even.
  • Smooth Shading: Creates a continuous gradient of color without any discernible lines. The best way to apply smooth shading is to bruise the skin with a blunt tool. You can vary the darkness of the shading by varying the amount of pressure that you apply.

Step #7: Finished Banana

Banana Oxidation ArtBanana Oxidation ArtBanana Oxidation ArtBanana Oxidation Art
  • Continue to apply lines and shading until you are satisfied with the level of detail. All the markings will continue to darken over time. The finer details may last a few hours. The overall shape may remain for up to a day. It is a very temporary form of art, so take a picture of it.
  • It's a fun little project to try out the next time that you find yourself stuck in the house on a rainy day.

Conclusion

This is an interesting way to add a little fun to your packed lunches.

Related Projects

The Diddley Bow
The Diddley Bow

By: David L. Williams Jr.

Parabolic Microphone
Parabolic Microphone

By: Jim Lee

Styrofoam Plate Speaker
Styrofoam Plate Speaker

By: Jose Pino

Computer Cursive
Computer Cursive

By: Natalie Zee Drieu

Sounds from Old CFLs
Sounds from Old CFLs

By: Andrew Carrell

MoofTronic Mini Synth
MoofTronic Mini Synth

By: Brian McNamara

Drumbots
Drumbots

By: Michael Una

Electronic Drum Kit
Electronic Drum Kit

By: Tom Zimmerman

In the Maker Shed

Telegraph Decoder Kit by Spikenzie Labs

Telegraph Decoder Kit by Spikenzie Labs

Ultimaker 3D Printer

Ultimaker 3D Printer

Make: Getting Started with Soldering Kit

Make: Getting Started with Soldering Kit

Make: Getting Started with Soldering Kit

Raspberry Pi Starter Kit - Includes 512MB Raspberry Pi

Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out / Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out / Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out / Change )

Cancel

Connecting to %s

Join the MAKE Forum
Makershedad_DOTW_206_14_USEME

// What's Trending

Raspberry Pi Design Contest
Raspberry Pi Design Contest
  • By: Nick Normal
  • Hits: 16231
Dad Builds Son an Iron Man Arc Reactor
Dad Builds Son an Iron Man Arc Reactor
  • By: Ken Denmead
  • Hits: 6184
Teardrop Camper Trailer
Teardrop Camper Trailer
  • By: Werner
  • Hits: 4185
Seventeen Sneaky Secret Hides
Seventeen Sneaky Secret Hides
  • By: Sean Michael Ragan
  • Hits: 4165
What to do with an 800 Lb Eucalyptus Slab
What to do with an 800 Lb Eucalyptus Slab
  • By: Michael Colombo
  • Hits: 3834
10 Things to Connect to Your Raspberry Pi
10 Things to Connect to Your Raspberry Pi
  • By: Alasdair Allan
  • Hits: 2525
80-Ruxpin Art Installation
80-Ruxpin Art Installation
  • By: John Baichtal
  • Hits: 2407
Lego Steampunk Strandbeest Model
Lego Steampunk Strandbeest Model
  • By: John Baichtal
  • Hits: 2306

// What's Shared

A better way to slice a pumpkin
A better way to slice a pumpkin
  • By: Sean Michael Ragan
  • Shares: 42491
DIY Nerf Darts
DIY Nerf Darts
  • By: Adam Flaherty
  • Shares: 28379
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
  • By: Haley Pierson-Cox
  • Shares: 26972
In the Maker Shed: Minty Boost USB Charger
In the Maker Shed: Minty Boost USB Charger
  • By: Maker Shed
  • Shares: 22683
Mad’s Mouse House
Mad’s Mouse House
  • By: Meg Allan Cole
  • Shares: 14878
Lace Princess Crowns
Lace Princess Crowns
  • By: Meg Allan Cole
  • Shares: 13789
I Have a (Puzzling) Dream
I Have a (Puzzling) Dream
  • By: Gareth Branwyn
  • Shares: 10702
Play the Rings of a Tree Trunk Like a Record
Play the Rings of a Tree Trunk Like a Record
  • By: Matt Richardson
  • Shares: 10303

// Most Commented

bookmatched
Plastic Bags into Plastic Blocks: Revisited
  • By: Michael Colombo
  • Comments: 52
The Arduino Yún
10 Hot New Boards to Watch
  • By: Alasdair Allan
  • Comments: 26
Arduino Not Maker Movement
Why the Maker Movement is Here to Stay
  • By: Ken Denmead
  • Comments: 24
makeaskssquare
MAKE Asks: Roadside Hacks
  • By: Michael Colombo
  • Comments: 21
Screen Shot 2013-06-03 at 1.53.47 PM
DIY Hacks & How To’s: Convert From Battery Power to AC
  • By: Jason Poel Smith
  • Comments: 18
I'll be the first to admit I haven't maintained these saws very well. Mea Culpa. But here's the take away: the longer one is a rip saw. Use it to cut along the grain. The shorter one is a cross-cut saw. Use it to cut across the grain.
Ten Tips for Hand Saws and Blades
  • By: Michael Colombo
  • Comments: 18
borax
How To Make Your Own Laundry Detergent
  • By: Drew Hendricks
  • Comments: 13
One day it may become a grand dining table, but in the meantime (until space presents itself), I'll store it on the wall.
What to do with an 800 Lb Eucalyptus Slab
  • By: Michael Colombo
  • Comments: 11
MAKE
Trending Topics
About Maker Media

Make on Twitter Make on YouTube Make on Pintrest Make on Flickr Make on Facebook Stumble Make Magazine MAKE on Instagram MAKE on Google+

%d bloggers like this: