520658643_346001ff60_o

You want a design on a T-shirt and you want it now! Sometimes the best designs come out of desperation. Here’s how to put a cool design on a T-shirt ASAP!

You will need:

Dark T-shirt
Gloves
Safety goggles
Bleach
Spray bottle
Piece of cardboard
Pen or pencil
Marker
Paper
Scissors
Sink
Water
Spray-adhesive tack (optional)

Project Steps

Prepare.

Put on gloves and safety goggles.

Mix up a batch of 50/50 bleach to water solution in a spray bottle. Label it, and draw a skull and crossbones on the bottle so nobody mistakenly thinks it contains water.

Then put a piece of cardboard inside the shirt so the bleach doesn’t bleed through.

Design.

Draw a stencil design on paper and cut it out. Just remember that it’s going to be a stencil, so it should be designed so it can be filled in with color (or bleach).

Bleach can bleed into the shirt, so keep it simple and be bold. When you’re done, place the design on the shirt. I put some spray-adhesive tack on the back of the stencil so it would stick to the shirt a bit.

Bleach.

Set your sprayer to a fine mist and spray the bleach solution over the stencil. Watch the color disappear before your eyes.

Rinse.

If you leave the bleach on too long, it’ll make the fabric disintegrate, so when it’s getting close to the right color, dunk the shirt in a sink full of water and rinse until it doesn’t smell like bleach.

Dry it out, and you’re good to go — your T-shirt design is done!