Make: Projects
CEB Main Frame: Install Small Components
Install small components on your Compressed Earth Brick Press.
Additional Materials Required:
- Thin Cylinder Supports
- Magnet Holder
- Sensor Holder
- Leg Holders (2)
- 3/4" Galvanized Nuts (3)
Steps
Step #1: Install the thin Cylinder Supports
Next
- Install the thin cylinder supports by screwing the bolt in with an extra nut on it as shown, and placing the u-channel against the cylinder.
- Get both of them snug so the cylinder is centered with pressure on each side.
- Tighten down the nut to lock it.
