Hot Topics:
See All Topics

Make: Projects

Origami Ball / Kusudama

Make a modular Kusudama origami ball.

Origami Ball / Kusudama

This is a beautiful Kusudama Ball. If you’ve never done origami before, don’t be scared away. Take your time and you too can accomplish this.

I’m not 100% sure on the time frame. I have never started a project like this and worked it to the end. I usually take a few breaks….chocolate breaks! :)

Steps

Step #1:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • You will need 30 pieces of paper: 15 of one color and 15 of another color
  • I'm going to use double sided paper for my ball. This means there is color on both sides of the paper. Usually one side has color/design and the other is white.
  • I will do the directions in regular paper. Blue and Green.
  • Cut all pieces in half.
  • You should now have 30 pieces of one color and 30 pieces of the other.

Step #2:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Start with one piece of paper. This will be the "flower petal." Make sure you crease the paper really well.
  • Place paper colored side down.
  • Fold in half, per picture #1.
  • Unfold, per picture #2.

Step #3:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Take point at bottom right (A) and fold to center top (B). [Picture #1]
  • Take point at top left (A) and fold to center bottom (B). [Picture #2]
  • Your piece should look like a parallelogram. [Picture #3]

Step #4:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Now we are going to fold the larger triangle in half. Take the top right point (A) and fold to bottom center (B). [Picture #1]
  • Completed. [Picture #2]

Step #5:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • This next part can be tricky, so take it slow. Open up your last fold to 90 degrees. You will see there is a little pocket. [Picture #1 and #2]
  • The top point needs to fold down to the center top, closing the pocket. It should make a square. Crease well. [Picture #2]
  • I usually put my finger inside the pocket, pushing down on the paper. This makes the paper open up. Then gently press down on the outside. You will see it forming a square. Make sure the top points are straight and crease.
  • More pictures in next step.

Step #6:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Here are more pictures from that last step. It can be challenging. Just take your time.

Step #7:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Take top layer and fold top point down to bottom of square. [Picture #1]
  • Unfold the fold you just made. Take the top right side of the paper. Fold diagonally with the edge along the center line. [Picture #2]
  • Fold down/over using the first fold. [Picture #3]

Step #8:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Now simply "close the book" taking the left point of the square back over to the right. [Picture #1 and #2]

Step #9:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Fold top point down to bottom, similar to previous step. [Picture #1]
  • Unfold.
  • Take top left side and fold down along middle line, similar to what we did before. [Picture #2]
  • Fold down/over like before. [Picture #3]

Step #10:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Take notice of the flap. [Picture #1]
  • Fold so it's standing upright. [Picture #1]
  • You are going to stick your finger in the pocket again to open the pocket and kinda squash the front down. [Picture #2]
  • Make sure it stays centered. You can see the fold line in the back paper. Make sure the point you just made is lined up with that. [Picture #3]

Step #11:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Do the same on the other side.
  • I turn mine over so I'm working in a similar way as before. [Picture #1]
  • When you are finished it should look like this. [Picture #2]
  • I made one more without all the black marks for you to see. [Picture #3]

Step #12:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Now the easy part! This next piece is kinda like a "jacket" for the first piece.
  • Take your other piece of paper. Lay it color side down.
  • Fold in half and unfold — same as before. [Picture #1]
  • This time we are going to fold the top right corner down to the bottom middle. [Picture #2]
  • The other side — fold the bottom left corner to the top middle. [Picture #3]

Step #13:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Unfold both sides.
  • Let's put on the "jacket."
  • Take your first piece and lay it in the center of this piece, kinda at an angle along the fold lines. [Picture #1]
  • Simply tuck in the flaps. [Picture #2 and #3]

Step #14:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Place unit in front of you vertically. [Picture #1]
  • Fold the unit in half. [Picture #2]
  • Fold the top left point down to the lower right side, making a triangle. Make sure to also fold the little tab. [Picture #3]
  • Turn over and do the same to the other side.

Step #15:

NextOrigami Ball / Kusudama
  • Your first piece is finished!
  • Now make 29 more!!

Step #16:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Great Job - you've made 30 total units!
  • I made 3 in the green/blue color combo to show you how to assemble. [Picture #1]
  • I have also made 30 units in the black/red/pink combination (2 color paper) to finish the project. [Picture #2]

Step #17:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Let's Assemble!
  • Take two of your units. Look at picture #1 to show you the pocket and the tab.
  • Take one of your units and place the tab into the pocket of the other one. [Picture #2]
  • Slide the rest of the way in.

Step #18:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • We are going to finish the triangle shape by adding the third piece.
  • Lift up tab 1 and slide tab 2 into pocket 3. [Picture #1]
  • Finish the triangle by sliding tab 1 into pocket 5. [Picture #2]
  • Completed triangle. [Picture #3]

Step #19:

NextOrigami Ball / Kusudama
  • I am now going to continue with the black/red/pink units. [Picture #1]
  • You will notice this unit has 3 colors. The red piece has pink on the other side instead of white. This can make for a beautiful ball.

Step #20:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Continue adding units and making triangles. [Picture #1 and #2]
  • Notice the "petals." There should be 5 for each "flower." [Picture #3]
  • Keep going... you're almost there. The ball will begin to form.

Step #21:

NextOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • Here are some pictures while it's progressing.

Step #22:

Origami Ball / KusudamaOrigami Ball / KusudamaOrigami Ball / Kusudama
  • The last few pieces can be tricky - just take your time. Remember: triangle and 5 petals.
  • Completed!
  • Happy Folding!

Conclusion

Have fun and enjoy.

Related Projects

The Diddley Bow
The Diddley Bow

By: David L. Williams Jr.

Parabolic Microphone
Parabolic Microphone

By: Jim Lee

The Stealth Mic
The Stealth Mic

By: Bill Byrne

Elastic String Bass
Elastic String Bass

By: Len Keeler

Particleboard Amp Enhancer
Particleboard Amp Enhancer

By: David Battino

Styrofoam Plate Speaker
Styrofoam Plate Speaker

By: Jose Pino

Computer Cursive
Computer Cursive

By: Natalie Zee Drieu

Sounds from Old CFLs
Sounds from Old CFLs

By: Andrew Carrell

In the Maker Shed

Makey Makey Standard Kit

Makey Makey Standard Kit

Arduino Uno Rev 3 (Make SMD Version)

Arduino Uno Rev 3 (Make SMD Version)

Tux Case for Raspberry Pi

Tux Case for Raspberry Pi

Tux Case for Raspberry Pi

Getting Started with Arduino Kit v3.0

2 Responses to Origami Ball / Kusudama

  1. emma on said:

    rubbish does not tell you what to do rubbish rubbish

    Reply ↓
    • Danielle on said:

      Emma, you just need to click on the steps in the gray box on the left. Or you click on “all” next to the words “Project Steps” in the gray box and they’ll all be on one page for you.

      Reply ↓

Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out / Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out / Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out / Change )

Cancel

Connecting to %s

Join the MAKE Forum
Makershedad_DOTW_206_14_USEME

// What's Trending

Raspberry Pi Design Contest
Raspberry Pi Design Contest
  • By: Nick Normal
  • Hits: 16057
Dad Builds Son an Iron Man Arc Reactor
Dad Builds Son an Iron Man Arc Reactor
  • By: Ken Denmead
  • Hits: 5675
Seventeen Sneaky Secret Hides
Seventeen Sneaky Secret Hides
  • By: Sean Michael Ragan
  • Hits: 4141
Teardrop Camper Trailer
Teardrop Camper Trailer
  • By: Werner
  • Hits: 4092
What to do with an 800 Lb Eucalyptus Slab
What to do with an 800 Lb Eucalyptus Slab
  • By: Michael Colombo
  • Hits: 4001
10 Things to Connect to Your Raspberry Pi
10 Things to Connect to Your Raspberry Pi
  • By: Alasdair Allan
  • Hits: 2603
Lego Steampunk Strandbeest Model
Lego Steampunk Strandbeest Model
  • By: John Baichtal
  • Hits: 2511
80-Ruxpin Art Installation
80-Ruxpin Art Installation
  • By: John Baichtal
  • Hits: 2407

// What's Shared

A better way to slice a pumpkin
A better way to slice a pumpkin
  • By: Sean Michael Ragan
  • Shares: 42491
DIY Nerf Darts
DIY Nerf Darts
  • By: Adam Flaherty
  • Shares: 28380
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
  • By: Haley Pierson-Cox
  • Shares: 27006
In the Maker Shed: Minty Boost USB Charger
In the Maker Shed: Minty Boost USB Charger
  • By: Maker Shed
  • Shares: 22683
Mad’s Mouse House
Mad’s Mouse House
  • By: Meg Allan Cole
  • Shares: 14878
Lace Princess Crowns
Lace Princess Crowns
  • By: Meg Allan Cole
  • Shares: 13789
I Have a (Puzzling) Dream
I Have a (Puzzling) Dream
  • By: Gareth Branwyn
  • Shares: 10703
Play the Rings of a Tree Trunk Like a Record
Play the Rings of a Tree Trunk Like a Record
  • By: Matt Richardson
  • Shares: 10303

// Most Commented

bookmatched
Plastic Bags into Plastic Blocks: Revisited
  • By: Michael Colombo
  • Comments: 52
The Arduino Yún
10 Hot New Boards to Watch
  • By: Alasdair Allan
  • Comments: 26
Arduino Not Maker Movement
Why the Maker Movement is Here to Stay
  • By: Ken Denmead
  • Comments: 24
makeaskssquare
MAKE Asks: Roadside Hacks
  • By: Michael Colombo
  • Comments: 21
I'll be the first to admit I haven't maintained these saws very well. Mea Culpa. But here's the take away: the longer one is a rip saw. Use it to cut along the grain. The shorter one is a cross-cut saw. Use it to cut across the grain.
Ten Tips for Hand Saws and Blades
  • By: Michael Colombo
  • Comments: 18
Screen Shot 2013-06-03 at 1.53.47 PM
DIY Hacks & How To’s: Convert From Battery Power to AC
  • By: Jason Poel Smith
  • Comments: 18
borax
How To Make Your Own Laundry Detergent
  • By: Drew Hendricks
  • Comments: 13
One day it may become a grand dining table, but in the meantime (until space presents itself), I'll store it on the wall.
What to do with an 800 Lb Eucalyptus Slab
  • By: Michael Colombo
  • Comments: 11
MAKE
Trending Topics
About Maker Media

Make on Twitter Make on YouTube Make on Pintrest Make on Flickr Make on Facebook Stumble Make Magazine MAKE on Instagram MAKE on Google+

%d bloggers like this: