Hot Topics:
See All Topics

Make: Projects

Rubber Band Gun

A rubber band gun perfect for those secret missions!

Rubber Band Gun
  • Hammer
  • Wire cutters

Steps

Step #1:

NextRubber Band Gun
  • You will need a hammer,
  • wire snips,
  • wood your desired size about 1cm thick and about 10 cm across,
  • elastic bands 3>,
  • 1cm nails.

Step #2:

NextRubber Band Gun
  • Hammer one nail about 1cm in.

Step #3:

NextRubber Band Gun
  • Then hammer another nail on the opposite side on the other end as pictured.

Step #4:

NextRubber Band GunRubber Band GunRubber Band Gun
  • Some more views of it.

Step #5:

NextRubber Band GunRubber Band GunRubber Band Gun
  • Lay pieces out like this.
  • Hold them together with elastic bands (2 or more).

Step #6:

NextRubber Band GunRubber Band GunRubber Band Gun
  • Just snip the nail down a bit for more reliability.
  • Pop a rubber band over the nail at the top then tuck it in the gap between the two bits of wood.

Step #7:

Rubber Band Gun
  • Have fun!!!

Conclusion

Get ready for a mission!!!

Related Projects

195_195
College Bike Trunk

By: Frank Yost

M23_Switches_3904
Mystery Electronic Switches

By: Jeff Tregre

Parabolic Microphone
Parabolic Microphone

By: Jim Lee

See-Thru Potato Cannon
See-Thru Potato Cannon

By: William Gurstelle

Kustom Tonkas
Kustom Tonkas

By: Todd Lappin

The Stealth Mic
The Stealth Mic

By: Bill Byrne

Greener Surfboard
Greener Surfboard

By: Keith Hammond

Lego Recharger
Lego Recharger

By: John Edgar Park

In the Maker Shed

Gift Certificate

Gift Certificate

Tux Case for Raspberry Pi

Tux Case for Raspberry Pi

Getting Started with Arduino Kit v3.0

Getting Started with Arduino Kit v3.0

Getting Started with Arduino Kit v3.0

MAKE Rovera 4WD Arduino Robot Kit

2 Responses to Rubber Band Gun

  1. Goli Mohammadi on said:

    That’s not very constructive feedback, Jeff. How would you improve the project?

    Reply ↓
  2. Tom on said:

    well it was my first project and i got the size wrong so i altered the settings on my phone a nd took a photo of the screen

    Reply ↓

Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out / Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out / Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out / Change )

Cancel

Connecting to %s

Join the MAKE Forum
Makershedad_DOTW_%20Makershields

// What's Trending

Raspberry Pi Design Contest
Raspberry Pi Design Contest
  • By: Nick Normal
  • Hits: 25012
Lost PLA Casting from 3D Prints
Lost PLA Casting from 3D Prints
  • By: Eric Weinhoffer
  • Hits: 9173
Ten Tips for Adhesive Tape
Ten Tips for Adhesive Tape
  • By: Michael Colombo
  • Hits: 7544
Seventeen Sneaky Secret Hides
Seventeen Sneaky Secret Hides
  • By: Sean Michael Ragan
  • Hits: 4194
I Have a (Puzzling) Dream
I Have a (Puzzling) Dream
  • By: Gareth Branwyn
  • Hits: 3383
10 Things to Connect to Your Raspberry Pi
10 Things to Connect to Your Raspberry Pi
  • By: Alasdair Allan
  • Hits: 2970
Is it a Hackerspace, Makerspace, TechShop, or FabLab?
Is it a Hackerspace, Makerspace, TechShop, or FabLab?
  • By: Gui Cavalcanti
  • Hits: 2235
Teardrop Camper Trailer
Teardrop Camper Trailer
  • By: Werner
  • Hits: 1810

// What's Shared

A better way to slice a pumpkin
A better way to slice a pumpkin
  • By: Sean Michael Ragan
  • Shares: 42287
DIY Nerf Darts
DIY Nerf Darts
  • By: Adam Flaherty
  • Shares: 27086
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
100 Dollar Store Organization Ideas for Craft Rooms and Beyond
  • By: Haley Pierson-Cox
  • Shares: 22837
In the Maker Shed: Minty Boost USB Charger
In the Maker Shed: Minty Boost USB Charger
  • By: Maker Shed
  • Shares: 22050
Mad’s Mouse House
Mad’s Mouse House
  • By: Meg Allan Cole
  • Shares: 13848
Lace Princess Crowns
Lace Princess Crowns
  • By: Meg Allan Cole
  • Shares: 13097
I Have a (Puzzling) Dream
I Have a (Puzzling) Dream
  • By: Gareth Branwyn
  • Shares: 10505
Play the Rings of a Tree Trunk Like a Record
Play the Rings of a Tree Trunk Like a Record
  • By: Matt Richardson
  • Shares: 10252

// Most Commented

Jason Poel Smith Picture
DIY Hacks & How To’s: Get Emergency Power from a Phone Line
  • By: Jason Poel Smith
  • Comments: 39
sample parts
Resin Casting: Going from CAD to Engineering-Grade Plastic Parts
  • By: Michal Zalewski
  • Comments: 35
Don't get me wrong, they're cheap and often get the job done, but they were made to not drive well. They were designed specifically in the early 20th century to cam out when too much force was applied. Now that we have torque-limiting drills this isn't a problem anymore, yet somehow we still use them.
Ten Tips for Screws and Screwdrivers
  • By: Michael Colombo
  • Comments: 27
We use the phrase "two by four" in common parlance, but did you know it's actually 3.5 inches wide? Don't make assumptions on size; always measure first.
Ten Tips for Better Measurement
  • By: Michael Colombo
  • Comments: 19
BrainMachineWorkshop
Is it a Hackerspace, Makerspace, TechShop, or FabLab?
  • By: Gui Cavalcanti
  • Comments: 17
E59A0674
Makers on TV: Big Brain Theory
  • By: Sabrina Merlo
  • Comments: 12
Arduino Yun
Arduino Announces New Wireless Linux Board
  • By: Andrew Terranova
  • Comments: 12
Screen shot 2013-05-08 at 12.56.44 PM
Grow: A Portable CNC Router System
  • By: John Baichtal
  • Comments: 11
MAKE
Trending Topics
About Maker Media

Make on Twitter Make on YouTube Make on Pintrest Make on Flickr Make on Facebook Stumble Make Magazine MAKE on Instagram MAKE on Google+

%d bloggers like this: