Weekend Project Instructions - Rodent Powered Nightlight

Make sure to download the PDF for this project and print it out to look at as you make this project. Also make sure to watch the video that goes along with these instructions!

To begin, I needed a rodent wheel. I chose the mouse wheel, because when I visited the pet store, the mice were running on the wheel while all the other rodents were busy sleeping.

Mouse1

Then I affixed magnets to the side of it. After significant trial and error, I used a shower drain that turned out to be the perfect size and affixed them with superglue. This is trickier than it seems because the magnets are powerful. Be careful because these magnets can pinch your fingers. I used 1/2" Neodymium magnets from Amazing Magnets. but in retrospect, the 3/4" magnets recommended in the article might provide more power. Once the magnets were on the drain-plate, I attached the drain-plate to the side of the wheel with more superglue and zipties.

Mouse2

I used sewing bobbins to wind my coils and they worked great. Once you get a coil all wound up, give it a coat of superglue to make it behave. I made 6 coils and went through three containers of superglue and two rolls of 30 gauge magnet wire on this project, so make sure to stock up!

I re-used the structural wire-rods being used as a base for the axle. I used a hot-glue gun to hold the coils in place. I used a bit of 2x4 left over from the workbench I made two weekends ago.

Now that I'm done with it, I want to add a bicycle computer to see how far Annika runs in a day and track her progress. I'm also planning on adding some ball bearings to make the wheel quieter. I tried adding some silicon dust lube, but it didn't help. I'd also like to learn how to make a mouse-cam and give these mice a home on the web!


Recent Entries

Comments

Oldest comments listed first.

Posted by: kae_verens on July 21, 2006 at 10:52 PM

you know, for years, I've had an idea based on something like this - you get a few hamsters, and separate them into different cages, each with a wheel generating electricity, with a switch measuring how many revolutions the wheels make.

feed the hamsters /exactly/ the same amount each. no hamster should get more than any other.

every few months, you examine the numbers to see which hamsters are the more energetic.

breed the more energetic ones.

after some years, you have a race of super-hamsters, who will power your house in return for a small amount of hamster food.

Kae


Posted by: screaminscott on July 22, 2006 at 6:44 PM

I wonder if you could use the same thing with those spinning pinwheel yard decorations? Maybe use them to charge a battery to power low voltage landscape lighting? An advantage is that the wind also blows at night.


Posted by: screaminscott on July 22, 2006 at 6:44 PM

I wonder if you could use the same thing with those spinning pinwheel yard decorations? Maybe use them to charge a battery to power low voltage landscape lighting? An advantage is that the wind also blows at night.


Posted by: sloober on July 23, 2006 at 11:17 AM

Did you add weight to the other side of the wheel opposite the magnets?
If not and the wheel is not balanced, it will be very difficult for the mouse to keep it at a contant speed.
Use some lead stick on weights.
John


Leave a comment


Subscribe to MAKE!Subscribe to MAKE Magazine!

Subscribe today, save 42% and get web access to MAKE free. MAKE Digital Edition is available only to subscribers.

$34.95 / 1 year
(4 Quarterly Issues)

Subscribe now


Void your warranty, violate a user agreement, fry a circuit, blow a fuse, poke an eye out. Make: The risk-takers, the doers, the makers of things... Welcome to Make: Online!


CRAFT Maker Shed Maker Faire MAKE television
MAKE: en EspaƱol MAKE: Japan


Check out all of the episodes of Make: television

Make: Science Room

Connect with MAKE

Be a MAKE fan on Facebook MAKE on Facebook
Visit our Facebook page and become a fan of MAKE!
MAKE on Twitter MAKE on Twitter
Follow our MAKE tweets!
MAKE Flickr Pool MAKE on Flickr
Join our MAKE Flickr Pool!
    make_tips on Twitter

    MAKE's RSS feed is here.
    Add MAKE to iGoogle - GoogleGoogle.
    How to add MAKE to your RSS reader - Real simple.
    Add MAKE on FriendFeed




    Maker SHED

    Advertise here with FM.

    Why advertise on MAKE?
    Read what folks are saying about us!

    Click here to advertise on MAKE!



    Subscribe to MAKE Magazine!

    Make: Online authors!

    Gareth BranwynGareth Branwyn
    Senior Editor


    Phillip TorronePhillip Torrone
    Senior Editor
    | AIM | Twitter


    Becky SternBecky Stern
    Associate Editor
    | AIM | Twitter


    Marc de VinckMarc de Vinck
    Contributing Writer
    | AIM | Twitter


    John ParkJohn Park
    Contributing Writer
    | Twitter


    Sean RaganSean Ragan
    Contributing Writer
    | Twitter


    Matt MetsMatt Mets
    Contributing Writer
    | AIM | Twitter


    Dale DoughertyDale Dougherty
    Editor & Publisher
    | Twitter


    Shawn ConnallyShawn Connally
    Managing Editor
    | Twitter


    Goli MohammadiGoli Mohammadi
    Associate Managing Editor

    Kip KayKip Kay
    Weekend Projects
    | AIM | Twitter


    Collin CunninghamCollin Cunningham
    Contributing Writer
    | AIM | Twitter

    Adam FlahertyAdam Flaherty
    Contributing Writer
    | AIM | Twitter



    More contributors: Mark Frauenfelder (Editor-in-Chief, MAKE magazine), Kipp Bradford (Technical Consultant/Writer), Chris Connors (Education), Diana Eng (Guest Author), Peter Horvath (Intern), Brian Jepson (O'Reilly Media), Robert Bruce Thompson (Science Room)

    Suggest a Site!

    Current Podcast

    itunesdl.gif Weekend Project: Making Char Cloth Learn how to make a cheap and effective fire starter made from an old t-shirt. To download The Char Cloth video click here and subscribe in iTunes. See Char Cloth in action with the Fire Piston from William Gurstelle.... More...

    Get the Make: Online sent via email
    Enter your email to receive Make: Online each day:



    MAKE Fascination video series brought to you by Dow

    Make: Education

    Important please read


    Subscribe to MAKE Magazine!

    Recent Posts from the Craft: Blog